200 L metal or plastic drum Heating jacket - 1200W (0-90°C)

This 1200 Watts metal or plastic drum heating jacket allows you to heat or maintain an appropriate temperature in your 200-litre drum, thanks to 1 integrated thermostat (from 0°C to 90°C). This 1200 Watts drum heating jacket is suitable for 200-litre metal or plastic drums.

This heating jacket is specially designed to melt or reduce the viscosity of materials such as soaps, greases, varnishes, and oil-based products.

All technical specifications for this heating jacket are detailed in the "Technical Data" tab above. You can also download the technical data sheet.

Materials used in the jacket

This heating jacket is manufactured from lightweight but resilient materials and fitted with adjustable quick release buckles for ease of installation and removal.

The heating element is stitched into an insulated jacket made from a water resistant Teflon/Polyester material, itself stitched into a needled silica glass wadding, complete with quick release buckles for easy installation and removal. The heating element is protected against power surges by a tinned copper earthing braid.

Technical data:

• Metal or plastic drum
• Heated face: Polyester base fabric, Teflon coated
• Outer face: 100 dtex [à confirmer — FR indique 1100 dtex] textured nylon, polyurethane coated
• Insulation: Glass filament wadding
• Element: Silicone insulated spiral wound resistance element
• Control: 1 adjustable thermostat from 0°C to 90°C (230 Volts)
• Power cable: H07RN-F, 5 metres of braided power cable
• Fixing: Nylon webbing with quick release adjustable buckles
• Protection: IP40

Included: thermostat limit stop

Choose your own maximum thermostat temperature! Every heating jacket thermostat is supplied with a limit stop that lets you set the maximum operating temperature. A simple adjustment of the thermostat lets you move the limit stop to suit your needs.

Health and safety

• This heater jacket is manufactured to conform to the EEC low voltage and EMC directives and is CE marked accordingly.
• It is advised that power to the heater jacket be disconnected when the drum is either empty or being filled, or upon installation or removal of the heater itself.
• It is recommended that the unit be operated in a dry environment with the drum vented to avoid build up of internal pressure.