Heating jacket - 100 L Drum - 700 W

Those jackets for 100 L drums have a slightly higher grade of insulation, so are better at holding in the heat. The inner layer is also more effective at withstanding chemicals and temperatures that may normally affect nylon.

- Suitable with plastic drums and metal drums
- 5 metres supply cable (2*1mm², PVC insulated, sheathed, galvanised steel wire braided)
- Integrated adjustable thermostat from 0° to 90° (0-45°C available upon request)

Thermostat limit peg : Choose your own thermostat maximum temperature !

In your manufacturing process, you may need to limit the maximum temperature of a heating jacket (due to safety, product quality, etc..). With Axesspack, each heating jacket thermostat has a limit peg that lets you choose the maximum temperature of your jacket according to your needs. The limit peg is initially placed to maximum and does not limit the heating power. A simple manipulation of the thermostat will allow you to move the limit peg according to your needs.

Advantages :
- Can be used with plastic and metal drums
- Adjustable straps
- Easy cleaning and handling
- Waterproof Nylon resistant to water projections
- Important surface contact
- Avoid coking problems due to an uniform diffusion of heat.
- Low power consumption.
- 1 year warranty

Materials used : It incorporates a heavy duty waterproofed nylon outer material, fitted with adjustable retaining straps and quick release clips. A high thermal efficiency layer of insulation is held in place between the outer cover and the inner element carrier. The silicone insulated heating element is woven back and forth along the length of the carrier. The braided supply cable and thermostat housing is retained by a polycarbonate gland and an insulating plate.

> Inner layer: Silicon coated glass cloth (grey)
> Layer 2: Heating element
> Layer 3: Glass cloth
> Layer 4: Thick fibre glass insulation
> Outer layer: Silicon coated glass cloth (grey)