25 L Drum Heating jacket - 200W (0-40°C)

This 200 W drum heating jacket lets you heat or maintain temperature in your 25 L drum, thanks to one integrated thermostat (0°C to 40°C). It is suitable for 25-litre metal and plastic drums.

This jacket is ideally suited for warming a variety of products including fats, oils and foodstuffs. Used throughout the world by a multitude of industries — from pharmaceutical to chemical, cosmetic to food — this heating jacket is the ideal solution for heating liquid materials stored in metal or plastic 25 L drums.

This heating jacket is manufactured from lightweight but resilient materials and fitted with adjustable, quick-release buckles for easy installation and removal. Temperature is regulated via a built-in thermostat, up to a maximum of 40°C for plastic drums.

The heating element is stitched into an insulated jacket made from a water-resistant Teflon/polyester material, itself stitched into a wadded layer of needled silica glass, with quick-release buckles for easy fitting and removal. The heating element is protected against power surges by a tinned copper earth braid.

Technical data

• Jacket material — heated face: polyester base fabric, Teflon coated. Outer face: 1100 dtex texturised nylon, polyurethane coated
• Insulation: glass filament blanket
• Element: silicone-insulated, spiral-wound resistance element
• Control: 1 adjustable thermostat from 0°C to 40°C (230 V)
• Power cable: H07RN-F, 5 metres of braided power cable
• Fixing: nylon webbing with quick-release adjustable buckles
• Protection rating: IP40

Axesspack always gives you more: the thermostat limit peg included

This 200 W heating jacket (0°C to 40°C) is supplied with:

Thermostat limit peg

Choose your own thermostat maximum temperature! Every Axesspack heating jacket thermostat includes a limit peg that lets you set the maximum operating temperature. A simple turn of the thermostat lets you move the limit peg to suit your needs.

Health and safety

• This heater jacket is manufactured to conform to the EEC low voltage and EMC directives and is CE marked accordingly.
• It is advised that power to the heater jacket be disconnected when the drum is either empty or being filled, or upon installation or removal of the heater itself.
• It is recommended that the unit be operated in a dry environment with the drum vented to avoid build-up of internal pressure.

Axesspack advises you for a faster quote