IBC flexible heater - 2700W
IBC flexible heater - 2700W
IBC flexible heater - 2700W
IBC flexible heater - 2700W
IBC flexible heater - 2700W
IBC flexible heater - 2700W
IBC flexible heater - 2700W
IBC flexible heater - 2700W
IBC flexible heater - 2700W
IBC flexible heater - 2700W

IBC flexible heater - 2700W

070641

Standard use


Spécifications techniques

Packaging
1 Unit
Weight of packing (kg)
Voltage (V)
230 V (110 V available on demand)
Puissance (Watts)
2700
Utilisation
Utilisation standard
Puissance du thermostat
0°C to 120°C
Available on ChaufferMonEmballage.com
Buy now on Chauffermonemballage.com
 

Using wire wound silicone heating technology, this flexible heater is an effective solution for heating any product contained in a 1000 liters IBC tank. This heater is a silicone mat heater for placement below the container liner before filling, coupled with a digital temperature controller this provides direct, accurate heating of the liner contents.

This silicone heater mat comprises a high temperature resistance wire element, laminated between silicone/glass sheets. A PTC temperature sensor is also embedded between the sheets. This connects to an electronic temperature controller via the heater power cable and provides accurate measurement and fast response to temperature changes at the bottom of the IBC liner. This makes the heater suitable for both high energy absorbing products and highly viscous, temperature sensitive materials.

  • Drop in/Removable base heater
  • Silicone rubber insulated
  • Integral PTC temperature sensor
  • In-built residual current device
  • 0-150°C Electronic controller
  • Standard 1000L size.

Technical data :

  • Rating : 2700 watts 230 volts CA
  • Performance with insulated jacket : Water temperature from 15°C to 70°C in 30 hours
  • Performance without insulated jacket : Water temperature from 15°C to 70°C in 42 hours

Digital temperature control unit :

  • Enclosure size : Length 200mm ; wide 150 mm ; height : 105 mm (Excluding mounting bracket)
  • Supply voltage : 230 Volts CA
  • Maximum power : 3000 watts
  • Sensor input : PTC1000 via 4 pole socket
  • Output to heater : 4 pole socket
  • Electrical protection : 2 meters, diameter 1.5 mm2 PVC
  • electrical protection :  Residual current device*

* For correct functionning of the RCD device the mounting bracket must have an earth bond strap to the metallic surface the heater is fixed to.

Health and safety :

  • This heater is manufactured to conform to the EEC low voltage and EMC directives and is CE marked accordingly.
Packaging
1 Unit
Weight of packing (kg)
Voltage (V)
230 V (110 V available on demand)
Puissance (Watts)
2700
Utilisation
Utilisation standard
Puissance du thermostat
0°C to 120°C
Available on ChaufferMonEmballage.com
Buy now on Chauffermonemballage.com